Task sheet 3.

1.3

We are using the metal aluminium because it is weather resistant flexible and light. and is also easy to shape into a box. it is also very easy to work with.
We are using silicon because it is a semi conductor and we are working with a series of light.

1.1

The material are both a form of metals, Aluminium is also weather resistant, malleable and very easy to work wih, Silicone is a semi conductor.

Cutting out handboard.

Start of cutting out handboards for my light shade.

Reflection week 9 term 3.

This week I intend to start cutting out my boards and finishing all my blog work.

Overview week 9 term 3.

 Period 3(Reflection, Post photos, Update calendar) Period 4-( Practical  and final design) Thursday Checklist and Friday pratical.

Materials justification.

I am going to use bendy marine grade ply 4-5mm and I am going to use double woven fiber glass for the inside and a Epoxy resin to mold it together and shape it.

Light shade design.

Reflection week 8 term 3.

This week I want to take more photos of my mockups and also get started on my actual boards I also need to finish my evaluation.

Handboard mockup.

Evaluation.

At the start I was given a piece of aluminum that was about 180x180mm then I had to scribe and then cut out with a piercing saw then carried on with tin snips then I started to bend my brackets and start to make a box out of the bottom plate, then I had to screw the brackets onto the box after that we went down to the electronics room and started to practiced making circuits after making four our five we were aloud to move onto the real ones we had to solder then together and then put heat shrink and put and LED on each end of the circuit.After this I attached them to a circuit board and started to put them into my box, when I had finished this i started on cutting out my handboards which will be used for me light shade which is still in progress, After that I will put veneer on them and attach them to each other making a 4 sided light shade where the light will come out the top.
The light will be placed at the bottom of the 4 sided light shade and will shine upwards and out the top of the shade.

In week 6...

In week six we had exams but I made time to come in and finish my light box, I had to connect the solar panel to the top of my box and also connect the circuit in the end I finished by my light wouldn't turn on so this is something I will have to look at to fix.

Photos of complete box and circuit.

Reflection week 3 term 3.

This week I intend to finish my light box by Friday and also my engineering drawing and also want to finish all my Solidworks stuff.

Overview week 5 term 3.

Today we are looking at the materials list and also solid works-parts and we are doing our engineering drawing and after lunch our light box practical on Thursday we are looking at the tool list and we need to finish solidworks and our 2-d design and by friday I hope to have my lightbox finished.

In order to finish my light box.

I need to do my kickers on solidworks and also finish my top plate I also need to attach a few wires to my circuit board.

Reflection week 4 term 3.

This week I would like to be finished all of my work including my light box and also finishing my top plate which I've been trying to finish for a while now.

Overview week 4 term 3.

Tuesday we're doing solid works and discussion of materials we will also do some 2-d design and after lunch we will be doing some practical.

Concave